Sony DCRSR42 Operating Guide - Page 16

• You can check the free hard disk space by touching (HOME) t (MANAGE HDD/MEMORY) t [ INFO]. • If the ACCESS lamp is lit or flashing after recording is finished, it means data is still being written onto the hard disk or "Memory Stick Duo." Do not apply shock or vibration to your camcorder, and do not remove the battery or AC Adaptor. • You can capture up to 3 still images by pressing PHOTO during movie recording (DCR-SR200/ SR300). • The maximum continuous recordable time is approximately 13 hours. • When a movie file exceeds 2 GB, the next movie file is created automatically. • The maximum recordable time are followings (with recording mode [SP]); DCR-SR42/SR62: approx. 10 hours and 50 minutes DCR-SR82: approx. 21 hours and 40 minutes DCR-SR200/SR300: approx. 14 hours and 30 minutes To record still images on a "Memory Stick Duo" You can change the recording media of still images to a "Memory Stick Duo." You can use only a "Memory Stick Duo" marked with or . x Inserting/ejecting a "Memory Stick Duo" Open the LCD panel, then insert the "Memory Stick Duo" into the Memory Stick Duo slot in the right direction until it clicks. ACCESS lamp ("Memory Stick Duo") To eject a "Memory Stick Duo," open the LCD panel, lightly push the "Memory Stick Duo" in once. 16 • When the ACCESS lamp is lit or flashing, your camcorder is reading/writing data. Do not shake or knock your camcorder, turn the power off, eject the "Memory Stick Duo," or remove the battery pack. Otherwise, image data may be damaged. • If you insert the "Memory Stick Duo" into the slot in the wrong direction, the "Memory Stick Duo," the "Memory Stick Duo" slot, or image data may be damaged. • The numbers of recordable still images on the "Memory Stick Duo" (1GB) are followings (with the default setting of the image size as shown in ( )); DCR-SR42: 5,900 ([VGA (0.3M)]) DCR-SR62/SR82: 1,800 ([1.0M]) DCR-SR200: 480 ([4.0M]) DCR-SR300: 315 ([6.1M]) • All numbers measured when using a "Memory Stick Duo" made by Sony Corporation. The number of recordable images varies depending on the recording environment. • The number of recordable images varies depending on the image quality or the image size. For details, see "Handycam Handbook" (PDF). x To change the recording media of still images 1 Touch (OPTION) t tab t [STILL MEDIA]. 2 Select the media in which you want to save still images, then touch . Your camcorder returns to recording standby mode. On Easy Handycam operation By pressing the EASY button, nearly all settings on the camcorder will be automatically operated so that you can perform recording or playing back operation without detailed settings. During Easy Handycam operation, appears on the LCD screen. To cancel Easy Handycam operation, press EASY again. • You cannot use some buttons/functions during Easy Handycam operation.