Sony HT-NT5 Operating Instructions - Page 63
Headphones or Speaker, Connection, Wired LAN Connection, Internet after [Wi-Fi Protected
View all Sony HT-NT5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Troubleshooting Headphones or Speaker Connection BLUETOOTH connection cannot be completed. Make sure that the BLUETOOTH indicator of the unit is lit (page 8). Make sure the BLUETOOTH device to be connected with is turned on and the BLUETOOTH function is enabled. Bring this system and the BLUETOOTH device closer together. Pair this system and the BLUETOOTH device again. You may need to cancel the pairing with this system using your BLUETOOTH device first. Pairing information may be deleted. Perform pairing operation again (page 31). Pairing cannot be achieved. Bring this system and the BLUETOOTH device closer together. Make sure this system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this system. You cannot use the NFC function. The NFC function does not work with BLUETOOTH-compatible headphones or speaker. To listen to sound using a BLUETOOTH-compatible headphones or speaker, see "Listening to Sound of the Connected TV or Device from Headphones or Speakers" (page 34). No sound is output from the connected BLUETOOTH device. Make sure that the BLUETOOTH indicator of the unit is lit (page 32). Bring this system and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this system. Remove any obstacle between this system and the BLUETOOTH device or move this system away from the obstacle. Reposition the connected BLUETOOTH device. Switch the wireless LAN frequency of any nearby Wi-Fi router or PC to 5 GHz range. Increase the volume on the connected BLUETOOTH device. Set [Wireless Playback Quality] to [Connection] (page 53). Wired LAN Connection The system cannot connect to the network. Check the network connection (page 20) and the network settings (page 55). Wireless LAN Connection You cannot connect your PC to the Internet after [Wi-Fi Protected Setup™ (WPS)] is performed. The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. The system cannot connect to the network or the network connection is unstable. Make sure the wireless LAN router is on. 63US