Sony KDE-37XS955 Operating Instructions - Page 28
Cable Box, For best results, use this connection if, With this connection you can
View all Sony KDE-37XS955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Setup Cable Box z Before connecting a cable box, See "Using CableCARD™" on page 51. For best results, use this connection if: s Your cable company scrambles all channels, which requires you to use a cable box. s You do not have a VCR. (If you have a VCR, see pages 30 and 32.) With this connection you can: s Use the remote control to change channels coming through the cable box to the TV's VHF/UHF jack. (You must first program the remote control for your specific cable box, see page 58.) About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, all channels come into the TV through your cable box and only one unscrambled signal is sent to the TV, so you cannot use the dual picture features. If some of your channels are scrambled, but others are not, consider using the "Cable Box and Antenna" connection on page 25 instead. To connect the cable box 1 Connect the CATV cable to the cable box's input jack. 2 Use the 75-ohm coaxial cable (not supplied) to connect the cable box's output jack to the TV's VHF/UHF jack. 3 Run the Auto Setup program, as described in "Setting Up the Channel List" on page 53. CATV cable 75-ohm coaxial cable Rear of TV VHF/UHF IN OUT Cable Box 26