Sony KF-50WE620 Operating Instructions (Large File - 11.3 MB) - Page 18
will not turn on., Reattach the lamp cover and tighten the screws. - lcd
View all Sony KF-50WE620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Introducing the Sony LCD Projection TV 7 Mount the new lamp. Be sure to attach the new lamp securely. Reattach the new lamp securely into the lamp receptacle. Tighten the two screws securely first 1, then 2 with the supplied hex key, as shown in the illustration. 8 Reattach the lamp cover and tighten the screws. Make sure the lamp cover is reattached securely, otherwise the power will not turn on. Align the right side of the lamp cover with the hole on the unit, and replace the lamp cover in its original position. ✍ If the screw of the lamp cover is slanted, the lamp may not light up properly. In such a case, take out the screw and reinsert it straight into the screw hole, then tighten the screw completely. ✍ If the lamp cover is not reattached securely, the self-diagnostic function may be triggered and the POWER/STANDBY indicator flashes three times (see page 87). 18