Sony KF-50WE620 Operating Instructions (Large File - 11.3 MB) - Page 43
Connecting a Digital TV Receiver with Component Connectors
View all Sony KF-50WE620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing and Connecting the LCD Projection TV Installing and Connecting the LCD Projection TV Connecting a Digital TV Receiver with Component Connectors Disconnect all power sources before making any connections. z Be sure to read the digital TV receiver's manual. 1 Using three separate component video cables, connect the digital TV receiver's Y, PB and PR jacks to the LCD projection TV. Use the HD/ DVD IN 5 or 6 inputs. ✍ The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. ✍ Component video connection is necessary to view 480i, 480p, 720p, and 1080i formats. For 480i signal, you may also use the S VIDEO or composite video connections, however, component video (Y, PB, PR) will provide the best picture quality for all format types. 2 Using audio cables, connect the digital TV receiver's AUDIO OUT jacks to the LCD projection TV's AUDIO/VIDEO IN jacks (HD/DVD IN 5 or 6). Digital TV receiver Y PB Component PR video cable (not supplied) Rear of LCD projection TV Audio cable (not supplied) AUDIO-R (red) AUDIO-L (white) ✍ You cannot record the signal from any equipment connected into the Y, PB and PR connectors. ✍ This LCD projection TV is not compatible with digital TV receivers configured with RGB or VGA output connectors. 43