Sony KF-50WE620 Operating Instructions (Large File - 11.3 MB) - Page 86
General, Cannot operate Menu - lcd replacement
View all Sony KF-50WE620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Other Information General Problem Possible Remedies How to restore Video settings ❏ Press RESET on the remote control while in the Video menu (see page 60). to factory settings How to restore Audio settings ❏ Press RESET on the remote control while in the Audio menu (see page 63). to factory settings Cannot cycle through the other ❏ Be sure the Video Label option is not set to "Skip" (see page 74). video equipment connected to the TV Cannot operate Menu ❏ If a menu option appears in gray, this indicates that the menu option is not available. Lost password ❏ In the password screen (see page 69), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. LED on the display unit is lit ❏ The POWER/STANDBY indicator lights up when the TV is turned on. If the LED blinks continuously, this may indicate the TV needs service. ❏ The TIMER indicates that the timer is set. When the timer is set, this LED will remain lit even when the LCD projection TV is turned off. LCD projection TV is fixed to ❏ Use Auto Program in the Channel menu to add receivable channels that are not one channel presently in the TV's memory (see page 67). ❏ Check your Channel Fix settings (see page 67). The replacement lamp does not ❏ The screw of the lamp cover may be slanted. Take out the screw, reinsert it straight light up into the screw hole, and then tighten it completely (see page 18). TV cabinet creaks ❏ When the TV is in use, there is a natural rise in temperature, causing the cabinet to expand or contract and may be accompanied by a slight creaking noise. This is not a malfunction. 86