Sony RDR-GX360 Operating Instructions - Page 23
Step 7: Easy Setup - dvd3
UPC - 027242735507
View all Sony RDR-GX360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Hookups and Settings 7 Set the command mode for the remote so it matches the command mode for the recorder you set above. Follow the steps below to set the command mode on the remote. A Hold down ENTER. B While holding down ENTER, enter the command mode code number using the number buttons. Command Mode Code number DVD1 number button 1 DVD2 number button 2 DVD3 number button 3 C Hold down both the number buttons and ENTER at the same time for more than three seconds. To return to the previous display Press O RETURN. To check the command mode for the recorder Press x (stop) on the recorder when the recorder is turned off. The command mode for the recorder appears in the front panel display. If the command mode for the recorder has not been changed, set the command mode for the remote to the default setting of DVD3. If the command mode for the remote is changed to DVD1 or DVD2, you will be unable to operate this recorder. Step 7: Easy Setup Follow the steps below to make the minimum number of basic adjustments for using the recorder. Settings are made in the following order. OSD Language Setup m Cable Box/Sat. Control Setup m Clock Setup m TV Type Setup m Finished! Number buttons 123 456 789 0 "/1 O RETURN M/m/