Sony RDR-GX360 Operating Instructions - Page 49
Recording From Connected Equipment Without the Timer, OPEN/CLOSE to close the disc
UPC - 027242735507
View all Sony RDR-GX360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Recording Recording From Connected Equipment Without the Timer +RW -RWVR -RWVideo +R -RVR -RVideo You can record TV programs on the recorder through the connected cable box/satellite receiver. Note To play a disc recorded with this recorder on other equipment, finalize the disc (page 66). If you set "Auto Finalize" to "On" in the "Features" setup (page 85), the Auto Finalize function works for DVDRWs (Video mode), DVD-Rs (Video mode) and DVD+Rs after recording. For details, see page 67. Z OPEN/ CLOSE 123 456 789 0 CH +/- INPUT DISPLAY z REC H PLAY x STOP X PAUSE REC MODE 1 Turn on the recorder and the connected cable box/satellite receiver. 2 Press Z OPEN/CLOSE, and place a recordable disc on the disc tray. Recording side facing down 3 Press Z OPEN/CLOSE to close the disc tray. Wait until "LOAD" disappears from the front panel display. Unused discs are automatically formatted. For the DVD-RW/DVD-R's recording format (VR mode or Video mode), see "Formatting a new disc" on page 48. 4 Press CH +/- or INPUT repeatedly to select the channel or input source you want to record. • When using the cable box/satellite receiver control, select the channel by pressing CH +/- on this recorder's remote. The recorder's input is switched to the connected input (LINE1 or LINE2). You can also use the number buttons. • When not using the cable box/satellite receiver control, select the connected input (LINE1 or LINE2) by pressing INPUT, and then select the channel on the cable box/ satellite receiver's side. 5 Press REC MODE repeatedly to select the recording mode. The display changes on the TV screen as follows: HQ HSP SP LSP SLP EP LP ESP For details about the recording mode, see page 47. 6 Press z REC. Recording starts. Recording continues until you stop the recording or the disc is full. Leave the cable box/satellite receiver turned on and do not change the channel you are recording. To stop recording Press x STOP. Note that it may take a few seconds for the recorder to stop recording. To pause recording Press X PAUSE. To restart recording, press X PAUSE again. ,continued 49US