Sony RM-VL1000/B Operating Instructions - Page 17
Finding a component code with the Search function, If you have succeeded, check that the Commander - code list
View all Sony RM-VL1000/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
When the remote control signal is sent, is shown on the display. TV The component should turn off. 5 If you have succeeded, check that the Commander is operating the other functions of your component, such as channel and volume control. See page 23 for details. If the Commander does not seem to be working Try repeating these setup procedures using the other codes listed for your components (see page 13). Notes on labels on the LCD display which have "learned" a remote control signal already If another signal has already been programmed on that label by the learning function (page 23), you cannot preset the component code number. To use it as a preset component label, first erase its learned signal (page 29). Finding a component code with the Search function You can find a code number available for a component that doesn't have one in the supplied "Component Code Numbers." Before starting the Search function Set each component to the following status to enable the Search function. TV, AMP: Power-on CD, MD, TAPE, DAT: Power-on with a playback source (disc, cassette tape, etc.) Other components: Power-off COMPO SYSTEM TIMER SCROLL SET POWER REC VIDEO1 VIDEO2 AUX TUNER CD TAPE MD TV PHONO DVD MENU GUIDE 2 3 5 1 6 VOL CH MUTING RECALL 4 Continued 17