Sony RM-VL1000/B Operating Instructions - Page 33

33

8

Press the SET button.

The display returns to the

previous one.

Notes

•

If you set a TV or an amplifier for

volume control setting to the TV or

AMP label displayed by default, the

signal of the preset component will

be transmitted. If you program any

signal for the VOL or MUTING

button of each component by

“

learning

”

, the learned signal

programmed for each component will

be transmitted.

•

Even if you preset another TV or

amplifier to a component label, when

the preset data of the TV or amplifier

for volume control setting to the TV

or AMP label displayed by default

will be not cleared, the signal of the

component preset by default will be

transmitted.

But if you set another TV or amplifier

for volume control setting, its signal

will be transmitted. In this case, its

learned signal will be transmitted if

you program any signal for the VOL

or MUTING button.

•

If a TV or an amplifier set for volume

control setting has no preset data for

the VOL or MUTING button, the

signal cannot be transmitted.

•

If you preset another category of

component than a TV or an amplifier

to the component label for which the

volume control setting has been

programmed, the signal of the VOL

or MUTING button cannot be

transmitted.

•

When operating a component which

has no volume data, if you have

programmed any signal for its VOL

or MUTING button of each

component by

“

learning

”

, the learned

signal programmed for the

component is transmitted even if you

try to control the volume using the

volume control function.

•

When controlling the volume of the

audio components, the signal of the

VOL or MUTING button or the

learned signal of the VOL or

MUTING button for the amplifier is

transmitted.

•


visual components, if a TV is set for

volume control setting, the signal of

the VOL or MUTING button or the

learned signal of the VOL or

MUTING button for the TV is

transmitted.

•


visual components, if an amplifier is

set for volume control setting, the

signal of the VOL or MUTING button

for the amplifier is transmitted for the

TV. But if you program any signal for

the VOL or MUTING button of the

TV, its learned signal is transmitted

for the TV.

Section	Page
Table of Contents	4
Getting Started	6
Location and Function of Controls	6
Installing the Batteries	7
When to replace the batteries	7
Setting the Clock	8
Setting the clock for the first time after installing batteries	8
Adjusting the clock after setting the clock	11
Basic Operations	13
Setting the Code for Preset Audio and Visual Components	13
Setting a component code	13
Checking if the code number works	16
Finding a component code with the Search function	17
To clear the contents programmed for a specific component label	19
Operating Your Components with the Remote Commander	21
To control the volume	23
Using Non-Preset Remote Control Operations — Learning Function	23
Notes on learning the signals of an air-conditioner	28
For accurate learning	29
Changing or erasing the function of a taught label or button	29
Advanced Features	30
Controlling the Volume of Visual Components Connected to an Audio System	30
Executing a Series of Commands — System Control Functions	34
Programming a series of commands for the System Macro labels	34
Notes on System Control Operations	38
To clear programmed commands for a specific System Macro number label	39
Programming a series of commands for the component labels	40
Changing the interval between operation steps	42
Changing the component macro executing time	43
Adding an Extra Function to the Component Labels	44
Programming the Power-On command of a selected component (for Sony components only)	44
Assigning Other Components to the Component Labels	46
Copying the settings of a component label to another label	46
Selecting a Channel with a Single Label — Channel Macro Function	48
Setting the Timer	51
Setting the new timer program	51
Changing the program already set or changing another program that you select	56
To clear timer settings programmed for a specific program number label	60
Using Other Functions	62
Locking the Controls — Hold Function	62
Adjusting the Automatic-Off Time of the Backlight of the Display Window	63
Setting the Key-Touch Beep	64
Adjusting the Contrast of the Display Window	65
Changing the Names of the Labels on the Display	65
Erasing All the Settings	68
Additional Information	70
Precautions	70
Maintenance	70
Specifications	70
Troubleshooting	71
Appendix	74
Table of Preset Functions	74
TV	74
SAT (Digital Satellite)	75
Digital cable box	76
DVD	77
VCR1, VCR2	78
DVR (Digital video recorder)	79
CD	80
CABLE (Cable box)	80
AMP	81
MD	82
DAT	82
TAPE A, TAPE B	83

Sony RM-VL1000/B Operating Instructions - Page 33

Press the SET button., The display returns to the, previous one.

Page 33 highlights