Sony RM-VL1000/B Operating Instructions - Page 34
Executing a Series of Commands — System Control Functions
View all Sony RM-VL1000/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Executing a Series of Commands - System Control Functions With the System Control function, you can program a series of operating commands, and execute them simply as follows. 1 When the display for component operation appears (if not, press the SET button repeatedly), press the SYSTEM button. 2 Select the System Macro number label by pressing the Label Select button. For example, when you watch a video, a series of operations like the ones below are necessary. Example: 1 Turn on the TV. 2 Turn on the video (VCR1). 3 Turn on the amplifier. 4 Set the input selector of the amplifier to VIDEO 1. 5 Set the input mode of the TV to VIDEO. 6 Start video playback. You can program up to 32 consecutive operation steps to each of the System Macro labels (SONY OFF, SYSTEM 2-12). At the factory, the SONY OFF label is preset with a series of the system power-off commands for Sony components. You can overwrite a system macro over this label. If you have set the System Control function for a component label (page 40), the execution of the programmed commands begins when you press the Label Select button corresponding to the label for more than 2 seconds. The component macro executing time is variable by changing the setting (page 43). While executing the programmed commands, at the same time that each remote control signal is transmitted, the corresponding label is displayed. Programming a series of commands for the System Macro labels Example: To program the procedure above for the SYSTEM2 label COMPO SYSTEM TIMER SCROLL SET 2 3,4 5,6 POWER REC VIDEO1 VIDEO2 AUX TUNER CD TAPE MD TV PHONO DVD 1,9 MENU GUIDE VOL CH MUTING RECALL 34