Sony RM-VL1000/B Operating Instructions - Page 50

50

Selecting a Channel with a

Single Label

—

Channel Macro

Function (continued)

7

Press the SET button.

The display returns to the

previous one.

Note

You cannot program the Channel

Macro function for a macro label that

has

“

learned

”

a signal. Try again with

another macro label, or clear the

“

learned

”

signal (page 29) and program

the Channel Macro function on it.

To change the name of the

Channel Macro labels on the

display

You can change the display of the

labels on the display to the most

suitable name using up to 8

characters or digits.

1

In Step 5 (page 49), select the

Channel Macro label of which

name you want to change (for

example, PIP CH+) by keeping

the Label Select button pressed

for more than 2 seconds.

The Commander enters the

Label Input mode.

2

Input the name of the label.

Follow Steps 3 - 5, on page 27-

28.

3

Press the SET button.

The Commander goes to Step 6

on page 49.

To clear the Channel Macro of a

label

In Step 5 (page 49), while pressing

the Label Select button

corresponding to the label that

you want to erase, press the

SCROLL button. (The labels for

which the Channel Macro is

programmed stay lit.)

“

CLEAR OK

”

appears and the

Channel Macro is cleared with a

beep sound.

The cleared label flashes together

with other labels which have no

Channel Macro data. The display

returns to the Channel Macro label

selecting mode.

If the character contents of the

label have been changed

To clear the character contents of

that label, perform the same

procedure above again. The input

contents are cleared and the label

display returns to the original

setting.

Note

When you select the label for which the

Channel Macro is programmed, the

‘

NG

’

sound is heard. If you release the

Label Select button then, data is not

cleared and the System Macro signal is

transmitted.

SET

CH MACRO

TV

PIP CH+

Section	Page
Table of Contents	4
Getting Started	6
Location and Function of Controls	6
Installing the Batteries	7
When to replace the batteries	7
Setting the Clock	8
Setting the clock for the first time after installing batteries	8
Adjusting the clock after setting the clock	11
Basic Operations	13
Setting the Code for Preset Audio and Visual Components	13
Setting a component code	13
Checking if the code number works	16
Finding a component code with the Search function	17
To clear the contents programmed for a specific component label	19
Operating Your Components with the Remote Commander	21
To control the volume	23
Using Non-Preset Remote Control Operations — Learning Function	23
Notes on learning the signals of an air-conditioner	28
For accurate learning	29
Changing or erasing the function of a taught label or button	29
Advanced Features	30
Controlling the Volume of Visual Components Connected to an Audio System	30
Executing a Series of Commands — System Control Functions	34
Programming a series of commands for the System Macro labels	34
Notes on System Control Operations	38
To clear programmed commands for a specific System Macro number label	39
Programming a series of commands for the component labels	40
Changing the interval between operation steps	42
Changing the component macro executing time	43
Adding an Extra Function to the Component Labels	44
Programming the Power-On command of a selected component (for Sony components only)	44
Assigning Other Components to the Component Labels	46
Copying the settings of a component label to another label	46
Selecting a Channel with a Single Label — Channel Macro Function	48
Setting the Timer	51
Setting the new timer program	51
Changing the program already set or changing another program that you select	56
To clear timer settings programmed for a specific program number label	60
Using Other Functions	62
Locking the Controls — Hold Function	62
Adjusting the Automatic-Off Time of the Backlight of the Display Window	63
Setting the Key-Touch Beep	64
Adjusting the Contrast of the Display Window	65
Changing the Names of the Labels on the Display	65
Erasing All the Settings	68
Additional Information	70
Precautions	70
Maintenance	70
Specifications	70
Troubleshooting	71
Appendix	74
Table of Preset Functions	74
TV	74
SAT (Digital Satellite)	75
Digital cable box	76
DVD	77
VCR1, VCR2	78
DVR (Digital video recorder)	79
CD	80
CABLE (Cable box)	80
AMP	81
MD	82
DAT	82
TAPE A, TAPE B	83

Sony RM-VL1000/B Operating Instructions - Page 50

CH MACRO, PIP CH, Channel Macro labels on

Page 50 highlights