Sony RM-VL1000/B Operating Instructions - Page 41
System, Cable, Compo
View all Sony RM-VL1000/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
1 In Step 4 (page 35), select "COMPO" by pressing the Label Select button. SYSTEM SET SYSTEM COMPO Component names are displayed. The labels for which a series of commands is programmed stay lit and others flash. 2 Select the component for which you want to program a series of commands by pressing the Label Select button (for example, DVD). To clear the component macro of a label In Step 2 (page 41), while pressing the Label Select button corresponding to the label that you want to erase, press the SCROLL button. (The labels for which a series of commands is programmed stay lit.) "CLEAR OK" appears and the component macro is cleared with a beep sound. The cleared label flashes together with other labels for which a series of commands is not programmed. Note When you select the label for which a series of commands is programmed, the 'NG' sound is heard. If you release the Label Select button then, data is not cleared and the component macro signal is transmitted. SYSTEM COMPO SET SYSTEM TV SAT CABLE DVD 3 Program a series of commands for the component label by following the same procedure of Step 6-8 on page 36. 4 Press the SET button. With a beep sound, a series of operating commands is registered. The display returns to Step 2 above. Continued 41