Sony RM-VL700S Operating Instructions - Page 15

Programming signals of another remote control - Learning Function To operate components or functions which do not work even if you set a component code number, use the following Learning procedure to "teach" any of the programmable buttons or the Commander to operate the functions of another remote control. You can also use the Learning function to change the signals of individual buttons after setting the component code number (page 8). It is recommended that you make a note of the "learned" key functions. (It is possible to make a note on the back of the supplied "Component Code Numbers.") Notes • Some specific remote control signals may not be "learned." • You can also use a display monitor for computer display (including a built-in tuner type), if the Commander is "learned." Example: To program the N (Play) signal of your video cassette recorder to the VCR N (Play) button of the Commander 1 Place the RM-VL700 head to head with your component's remote control. Remote control for your component about 2 - 4 inches (5 - 10 cm) away RM-VL700 2 Press and hold SET for over 3 seconds. The SET indicator lights up, and all Component Select buttons flash. Continued 15