Sony RM-VL700S Operating Instructions - Page 27

Assigning Other Components to the Component Select Buttons You can assign another component to any of the Component Select buttons not being used. Notes • Once you assign another component to a Component Select button, the setting of the component code number will be erased. The component code number will not return even if you reset the newly assigned component and turn back to the original component. To use the original component setting, set the component code number again (page 8). • If you have assigned another component to the TV or AMP button, the volume of the TV or amplifier (page 13,24) cannot be controlled even when you select other components. • If you have already programmed any remote control signals on the Component Select buttons using the Learning function, you cannot assign other components to the Component Select buttons. Example: To assign a CD player to the CBL/SAT button 1 Press SET. All Component Select buttons flash. 2 Press the Component Select button to which you want to assign a function. The selected Component Select button lights up. 3 While holding N pressed, press one of the following Number buttons to select the one to which you want to assign the function. In this example, press the Number 5 button to select CD. + The Component Select buttons change as follows, and assigning to the selected Component Select button will be set. when N is pressed when N + 5 are pressed when the buttons are released Continued 27