Sony RM-VL700S Operating Instructions - Page 29

Copying the settings of a Component Select button to another button You can copy the entire settings of a Component Select button to another Component Select button. The settings of the component code (page 8) and the "learned" function (page 15) are copied to a new button. 2 Press and hold for over 3 seconds the desired Component Select button to which you want to copy a setting from another component. While holding down this button, the other Component Select buttons flash. Then, when you press the Component Select button which holds the setting you want to copy, all Component Select buttons light up. When copying is complete, any Component Select buttons other than the two buttons pressed, turn off. for over 3 seconds Note You cannot copy the settings to a Component Select button on which any "learned" function (page 15) has been programmed. Example: To copy the settings of the DVD button to the TV button 1 Press SET. All Component Select buttons flash. To cancel setting, press SET. To return the setting of the Component Select button to the original component setting Clear the "learned" function (page 21) and perform the original component setting following the procedure on page 27. Tip Small data will be processed soon. 29