Sony RM-VL700S Operating Instructions - Page 25

25

To set only the audio

components

’

volume controls

to AMP

Press VOL

–

while holding

MUTING pressed.

Only AMP lights up when you

press these buttons, and then

turns off when you release

them.

When you press VOL-holding

MUTING pressed.

The buttons turn off when you

release them.

Volume control setting

complete.

Visual components are:

TV, video cassette recorder,

analog cable box, digital cable

box, digital satellite, DVD

player

Audio components are:

CD player, MD player,

cassette deck, amplifier

To cancel setting, press SET.

Note

If you used the Learning function to

program the VOL +/

–

or MUTING

buttons to send a signal to a

component, the procedure above will

not change the function of the VOL +/

–

and MUTING buttons.

1

Press SET.

All Component Select buttons

flash.

2

While holding MUTING

pressed, press VOL + or

VOL

–

.

To set all volume controls to

AMP

Press VOL+ while holding

MUTING pressed.

All Component Select buttons

light up when you press these

buttons, and then turn off

when you release them.

When you press VOL+ holding

MUTING pressed.

The buttons turn off when you

release them.

Volume control setting

complete.

Section	Page
Table of Contents	4
Getting Started	6
Installing the Batteries	6
When to replace the batteries	6
Location of Controls	7
Basic Operations	8
Setting the Code for non-Sony Preset Audio and Visual Components — Setting component codes	8
Setting a component code	8
Checking if the code number works	10
Setting a component code by the Search function	11
Operating Your Components with the Remote Commander	12
To control the volume	13
Notes on operating your components	14
Programming signals of another remote control — Learning Function	15
For accurate Learning	18
Programming remote control signals to the Component Select buttons	19
Changing or erasing the function of a “learned” button	21
Notes on programming the signals for an air-conditioner	23
Advanced Features	24
Controlling the Volume of Visual Components Connected to an Audio System	24
Adding an Extra Function to the Component Select Buttons	26
Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components	26
Assigning Other Components to the Component Select Buttons	27
Copying the settings of a Component Select button to another button	29
Using Other Functions	30
Locking the Controls — Hold Function	30
Erasing all settings — To reset the Commander to its factory settings	31
Additional Information	32
Precautions	32
Specifications	32
Troubleshooting	33
Appendix	35
Table of Preset Functions	35
TV	35
VCR	36
CBL (Cable box)	36
SAT	37
DVD	37
CD	38
MD	38
DAT	38
DECK	38
AMP	39
Digital Cable Box	39

Sony RM-VL700S Operating Instructions - Page 25

Press SET., While holding MUTING, pressed, press VOL + or, To set only the audio, components

Page 25 highlights