Sony RM-VL700S Operating Instructions - Page 28

Assigning Other Components to the Component Select Buttons (continued) Each component is assigned to the Number Buttons as follows. 1: VCR 3: SAT 4: AMP 5: CD 6: TAPE 7: MD 8: TV 9: CBL 0: DVD To reset a Component Select button to its original setting Perform the setting of the original component following the procedure on page 27. Note however if the original component has any "learned" signals, setting cannot be performed. To assign a digital cable box, select the Number button 3(SAT). Notes • In this step, only the factory-set function is assigned. Other newly "learned" functions (page 15) are not assigned. • If a component to be assigned has any "learned" signals, the indicator SET flashes twice. Then setting cannot be performed. In this case, clear the "learned" signals and follow Steps 1 - 3 again, or select another Component Select button which is not assigned to "learned" keys or buttons. • You can copy the "learned" remote control signals of a Component Select button to another button (page 29). 4 •If you need to set the component code, follow the steps on pages 8 to 9. •If you need to program some signals by the Learning function, follow the Steps 1 and 3 to 7 on pages 15 to 17. To cancel setting, press SET. 28