Sony RM-VL700S Operating Instructions - Page 8

Basic Operations Setting the Code for non-Sony Preset Audio and Visual Components - Setting component codes The Commander is preset at the factory to operate Sony brand AV components (see the table below). If you are using the Commander with a factory-set Sony components, skip the following procedures. You can use the Commander with other major brand preset AV components also. To use with other AV components, or Sony components which do not function with the Commander, you need to follow the procedures to set the correct codes for each component. Component Select Button TV VCR CBL/SAT Preset component(s) TV TV/VCR Combo VCR Cable box Factory setting Sony TV Sony VHS VCR DVD AMP DVD player Sony DVD player Amplifier Sony amplifier Note A CD player, an MD player and a cassette deck can be set to any of the above Component Select buttons. You can assign Component Select buttons to freely set signals of your desired components. For further information, see "Assigning Other Components to the Component Select Buttons" (page 27) . For the functions of buttons as for each component, see "Table of Preset Functions" (page 35). Setting a component code Example: To set up a Philips' TV 1 See the tables in the supplied "Component Code Numbers", and find the three-digit code number for the desired component. If more than one code number is listed, use the number that is listed first. For example, to set up a Philips' TV, you would use the code number 056. 2 Press SET. All Component Select buttons flash. 8