Sony SLT-A37M User Manual - Page 179

Print (Advanced operations) Print (Advanced operations) Print Specifying DPOF Using the camera, you can specify the still images before you print images at a shop or with your printer. Follow the procedure below. DPOF specifications are left with images after printing. It is recommended that you unspecify them after printing. 1 MENU button t 1 t [Specify Printing] t [DPOF Setup] t [Multiple Img.] 2 Select the image with b/B on the control button. 3 Check the mark by pressing the center of the control button. • To unspecify DPOF, select the image again, then press the center of the control button. 4 Press the MENU button. 5 Select [OK] with v, then press the center of the control button. Notes • You cannot specify DPOF on RAW data files. • You cannot specify the number of images to be printed. Date Imprint You can date images when printing them. The position of the date (inside or outside the image, character size, etc.) depends on your printer. MENU button t 1 t [Specify Printing] t [Date Imprint] t [On] Note • This function may not be provided, depending on the printer. 179