Sony SLT-A37M User Manual - Page 181
Cleaning the image sensor
View all Sony SLT-A37M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Cleaning (Advanced operations) Cleaning the image sensor If dust or debris enters the camera and adheres to the image sensor (the part that acts as the film), it may appear as dark spots on the photo image, depending on the shooting environment. If there is dust on the image sensor, clean the image sensor following the steps below. Notes • The camera starts beeping if the battery pack becomes low during cleaning. Stop cleaning immediately and turn the camera off. The use of an AC-PW10AM AC Adaptor (sold separately) is recommended. • The cleaning should be completed quickly. • Do not use a spray blower because it may scatter water droplets inside the camera body. Cleaning the image sensor automatically using the cleaning mode of the camera 1 Confirm that the battery is fully charged (page 22). 2 Press the MENU button, then select 2 with b/B on the control button. MENU button 3 Select [Cleaning Mode] with v/V, then press the center of the control button. 181