Sony STR-DA5300ES Operating Instructions (Large File - 21.32 MB) - Page 19
ZONE 2 connection, Getting Started, Notes
View all Sony STR-DA5300ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started b) When you connect a sub woofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a sub woofer, then sound may not be output. c) If you connect only one surround back speaker, connect it to the SURROUND BACK SPEAKERS L terminals. Notes • When you connect all the speakers with a nominal impedance of 8 ohms or higher, set "Impedance" in the Speaker settings menu to "8 Ω." In other connections, set it to "4 Ω." For details, see "8: Setting the speakers" (page 44). • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. Tip To connect certain speakers to another power amplifier, use the PRE OUT jacks. The same signal is output from both the SPEAKERS terminals and the PRE OUT jacks. For example, if you want to connect just the front speakers to another amplifier, connect that amplifier to the PRE OUT FRONT L and R jacks. ZONE 2 connection You can assign the SURROUND BACK SPEAKER terminals E and F to the speakers of the zone 2. Set "Sur Back Assign" to "ZONE 2" in the Speaker settings menu. See "Listening to the sound in another zone (ZONE 2/ZONE 3 operations)" (page 108) for details on connection and operation in zone 2. 19GB