Sony STR-DA5300ES Operating Instructions (Large File - 21.32 MB) - Page 39
: Preparing the receiver and the remote, Release the TONE MODE - factory reset
View all Sony STR-DA5300ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Getting Started 6: Preparing the receiver and the remote Connecting the AC power cord (mains lead) Connect the supplied AC power cord (mains lead) to the AC IN terminal on the receiver, then connect the AC power cord (mains lead) to a wall outlet. Notes • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. • Connect the AC power cord (mains lead) firmly. AC IN terminal To the wall outlet Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. 1,2 2,3 2,3 1 Press POWER to turn off the receiver. 2 Hold down POWER while pressing TONE MODE and DMPORT to turn on the receiver. 3 Release the TONE MODE and DMPORT after a few seconds. After "MEMORY CLEARING..." appears on the display for a while, "MEMORY CLEARED!" appears. All the settings you have changed or adjusted are reset to the initial settings. AC power cord (mains lead) (supplied) A several space is left between the plug and the rear panel even when the power cord (mains lead) is inserted firmly. The cord is supposed be connected this way. This is not malfunction. 39GB