Sony STR-DH520 Operating Instructions - Page 29
: Connecting the AC power cord (mains lead), Preparing the Receiver, Initializing the receiver - setting up
UPC - 027242809369
View all Sony STR-DH520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Preparing the Receiver 6: Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. AC power cord (mains lead) Preparing the Receiver Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to revert back to the factory default settings. Be sure to use the buttons on the receiver to perform this operation. ?/1 To the wall outlet Note Be sure to turn the receiver on when the video and audio signals of a playback equipment are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. The "CLEARING" appears on the display panel for a while, then changes to "CLEARED". Changes or adjustments made to the settings are now reset to the defaults. 29GB