Sony STR-DH520 Operating Instructions - Page 35

Preparing the Receiver Selecting the calibration type You can select the calibration type you want and then perform the Auto Calibration. 1 Press AMP MENU. 2 Press V/v repeatedly to select "A. CAL", then press or b. 3 Press V/v repeatedly to select "CUSTOM", then press or b. 4 Press V/v repeatedly to select the calibration type you want, then press . • FULL.FLAT Makes the measurement of frequency from each speaker flat. • ENGINEER Sets to "the Sony listening room standard" frequency characteristics. • FRONT.REF Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. • OFF Sets the Auto Calibration equalizer level to off. The Auto Calibration starts automatically. 5 Save the measurement result (page 33). Adjusting the speaker levels (TEST TONE) You can adjust the speaker levels while listening to the test tone from your seating position. Input buttons , V/v/B/b AMP MENU MASTER VOL +/-/ 2 +/- 1 Press AMP MENU. 2 Press V/v repeatedly to select "LEVEL", then press or b. 3 Press V/v repeatedly to select "T. TONE", then press . continued 35GB