Sony STR-DH520 Operating Instructions - Page 69

Specifications, AUDIO POWER - with 4 ohm speakers

Page 69 highlights

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 90 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section USA model1) Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 90 W + 90 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 100 W + 100 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 130 W per channel Canada, Europe, Australia and Taiwan models1) Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 85 W + 85 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 100 W + 100 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 130 W per channel 1)Measured under the following conditions: Area Power requirements USA, Canada, Taiwan 120 V AC, 60 Hz Europe, Australia 230 V AC, 50 Hz 2)Reference power output for front, center, surround, surround back and front high speakers. Depending on the sound field settings and the source, there may be no sound output. Frequency response Analog 10 Hz - 70 kHz, +0.5/-2 dB (with sound field and equalizer bypassed) Input Analog (PORTABLE IN) Sensitivity: 1 V/50 kohms S/N3): 96 dB (A, 500 mV4)) Analog (Except PORTABLE IN) Sensitivity: 500 mV/ 50 kohms S/N3): 96 dB (A, 500 mV4)) Digital (Coaxial) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Output (Analog) AUDIO OUT Voltage: 500 mV/1 kohm SUBWOOFER Voltage: 2 V/1 kohm Equalizer Gain levels ±6 dB, 1 dB step 3)INPUT SHORT (with sound field and equalizer bypassed). 4)Weighted network, input level. FM tuner section Tuning range 87.5 MHz - 108.0 MHz Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Area Tuning scale 10 kHz step 9 kHz step USA, Canada 530 kHz - 531 kHz - 1,710 kHz 1,710 kHz Europe, Australia, - Taiwan 531 kHz - 1,602 kHz Antenna (aerial) Loop antenna (aerial) Intermediate frequency 450 kHz Additional Information continued 69GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

69
GB
Additional Information
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
USA model
1)
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
90 W + 90 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W
Surround Mode Output Power
2)
(8 ohms, 1 kHz, THD 10%)
130 W per channel
Canada, Europe, Australia and Taiwan models
1)
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
85 W + 85 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W
Surround Mode Output Power
2)
(8 ohms, 1 kHz, THD 10%)
130 W per channel
1)
Measured under the following conditions:
2)
Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Analog
10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Input
Analog (PORTABLE IN)
Sensitivity: 1 V/50 kohms
S/N
3)
: 96 dB (A, 500 mV
4)
)
Analog (Except PORTABLE IN)
Sensitivity: 500 mV/
50 kohms
S/N
3)
: 96 dB (A, 500 mV
4)
)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
Output (Analog)
AUDIO OUT
Voltage: 500 mV/1 kohm
SUBWOOFER
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±6 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
87.5 MHz – 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna (aerial)
Loop antenna (aerial)
Intermediate frequency
450 kHz
Area
Power requirements
USA, Canada,
Taiwan
120 V AC, 60 Hz
Europe, Australia
230 V AC, 50 Hz
Area
Tuning scale
10 kHz step
9 kHz step
USA, Canada
530 kHz –
1,710 kHz
531 kHz –
1,710 kHz
Europe, Australia,
Taiwan
531 kHz –
1,602 kHz
continued