Sony STR-DH520 Operating Instructions - Page 36

4 Press V/v repeatedly to select "AUTO xxx*". The test tone is output from each speaker in sequence. * xxx represent a speaker channel. Note Depending on the speaker pattern settings, test tone may not be output from all speakers even though you selected "AUTO xxx". 5 Adjust the speaker levels. Use the LEVEL menu (page 54) to adjust the speakers to have the same sounding test tone level for each speaker. Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/- or 2 +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value are shown on the display panel during adjustment. 6 Exit test tone. Press any input buttons or select "OFF" under step 4. When a test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have the short-circuit problem. When a test tone is output from a different speaker than the speaker indicator showed in the display panel The speaker pattern set up is incorrect. Make sure that the speaker connections and the pattern match correctly. 36GB Basic Operations Playback Input buttons , V/v/B/b AMP MENU MASTER VOL +/-/ 2 +/- MUTING/ SOUND FIELD +/- 1 Turn on the connected equipment. 2 Turn on the receiver. 3 Press the input button which corresponds to the equipment you want. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display panel. Note When you press TUNER, "FM TUNER" or "AM TUNER" appears for a while, and then frequency appears on the display panel.