Sony STR-DH520 Operating Instructions - Page 8

Indicators on the display panel 1 23 4 5 6 7 89 LH RH SW LCR SL S SR SBL SB SBR LFE HDMI DTS -ES 96/24 NEO:6 COAX OPT DTS-HD MSTR HI RES LBR LPCM PL II x z D +EX ST RDS TrueHD SLEEP D.RANGE qd qs qa q; A Playback channel indicators The letters (L, C, R, etc.) indicate the channels being played back. Based on the speaker settings, the box around the letter(s) vary to show how the receiver downmixes the source sound. LH RH L R C SL SR S SBL SBR SB Front Left High Front Right High Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround equipment obtained by Pro Logic processing) Surround Back Left Surround Back Right Surround Back (the surround back equipment obtained by 6.1 channel decoding) Example: Speaker pattern: 3/0.1 Recording format: 3/2.1 Sound Field: A.F.D. AUTO SW LFE LCR SL SR B SW Lights up when the audio signal is output from the SUBWOOFER jack. C LFE Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. D Input indicator Lights up to indicate the current input. HDMI - The INPUT MODE is set to "AUTO", and when the receiver recognizes the equipment connected via an HDMI IN jack (page 51). - The TV input detected Audio Return Channel (ARC) signals. COAX The INPUT MODE is set to "AUTO" or "COAX", and when the source signal is a digital signal through the COAXIAL jack (page 51). OPT The INPUT MODE is set to "AUTO" or "OPT", and when the source signal is a digital signal through the OPTICAL jack (page 51). E DTS(-ES) indicator Lights up the respective indicator when the receiver is decoding the corresponding DTS format signals. DTS DTS-ES DTS 96/24 DTS DTS-ES DTS 96 kHz/24 bit Note When playing a DTS format disc, make sure that you have completed the digital connections and that INPUT MODE is not set to "ANALOG" (page 51). F NEO:6 Lights up when DTS Neo:6 Cinema/Music decoder is activated (page 44). 8GB