Sony STR-K502 Operating Instructions

Sony STR-K502 - Fm Stereo/fm-am Receiver Manual

Sony STR-K502 manual table of contents:

  • Sony STR-K502 | Operating Instructions - Page 1
    4-235-739-12(1) FM Stereo FM-AM Receiver Operating Instructions STR-DE575 STR-K502  2001 Sony Corporation
  • Sony STR-K502 | Operating Instructions - Page 2
    .... Refer to them whenever you call upon your Sony dealer regarding this product. Model No. STR-DE575/K502 Serial No. This symbol is intended to alert ...alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. ...
  • Sony STR-K502 | Operating Instructions - Page 3
    ... Manual The instructions in this manual are for the STR-DE575 and STR-K502. Check your model ... or lower right corner of the remote. In this manual, the STR-DE575 and the remote commander RM-... in operation is clearly indicated in the text, for example, "STR-DE575 only". About area codes The area ...
  • Sony STR-K502 | Operating Instructions - Page 4
    ...- properly oriented in the battery compartment. When using the remote, point it at the remote sensor g on the receiver. ] } ] } z When to replace batteries Under normal ..., the batteries should last for about 6 months. When the remote no longer operates the receiver, replace all batteries with new...
  • Sony STR-K502 | Operating Instructions - Page 5
    ...-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below. ...pickup, keep the AM loop antenna away from the receiver and other components. • Be sure to fully ...) To ground Important If you connect the receiver to an outdoor antenna, ground it against lightning....
  • Sony STR-K502 | Operating Instructions - Page 6
    Audio Component Hookups Required cords Hooking Up the Components DIGITAL OPTICAL DVD/LD IN Audio cords (not supplied) MD/TAPE deck INPUT OUTPUT LINE LINE L When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the ...
  • Sony STR-K502 | Operating Instructions - Page 7
    ...OUTPUT VIDEO IN VIDEO OUT ç OUT AUDIO IN AUDIO OUT L R VCR * STR-DE575 only. Jacks for connecting video components Connect a TV or satellite tuner VCR DVD or LD player ... on a separate bus from the video signals and will not be output through the video jacks. (STR-DE575 only) 7
  • Sony STR-K502 | Operating Instructions - Page 8
    ...RF demodulator, such as the Sony MOD-RF1 (not supplied). Required cords Optical digital cords (...IN jack. Refer to the instruction manual supplied with your RF Demodulator for details on DOLBY DIGITAL RF hookups... sure to set INPUT MODE (8 on page 23) manually. The receiver may not operate correctly if...
  • Sony STR-K502 | Operating Instructions - Page 9
    MULTI CH IN Hookups Although this receiver incorporates a multi channel decoder, it is also equipped ... them directly to the receiver to enjoy the sound of the DVD player's multi channel decoder. Alternatively... surround speakers, and a center speaker) and a sub woofer. Refer to the instruction manual...
  • Sony STR-K502 | Operating Instructions - Page 10
    ...on the CD player, tape deck, or MD deck to the AUX AUDIO IN jack on the receiver so that you can listen to stereo sources in surround sound. Connecting the AC power cord Before connecting the AC power cord of this receiver to a wall outlet: • Connect the speaker ...
  • Sony STR-K502 | Operating Instructions - Page 11
    ... the Speaker System This chapter describes how to hook up your speaker system to the receiver, how to position each speaker, ... up your speakers to enjoy multi channel surround sound. SET UP Jog dial MULTI CHANNEL ...SHIFT FM MODE FM AM Hooking Up and Setting Up the Speaker System Cursor buttons ...
  • Sony STR-K502 | Operating Instructions - Page 12
    ...System Hookup Required cords Speaker cords (not supplied) One for each front, surround, and center speaker Front speaker (R) Front speaker (L) Hooking Up and Setting Up the Speaker System Monaural audio cord (not supplied) One for an active ...
  • Sony STR-K502 | Operating Instructions - Page 13
    ...speakers Short-circuiting of the speakers may damage the receiver. To prevent this, make sure to take the following... conditions of the speaker cord Hooking Up and Setting Up the Speaker System Stripped... the one whose name is currently displayed on the receiver, the speaker may be short-circuited. If...
  • Sony STR-K502 | Operating Instructions - Page 14
    ...Before you use your receiver for the first time, use the SET UP button to adjust ...s memory Before you use your receiver for the first time or when you want to clear... on what will be cleared, see “Clearing the receiver's memory” on this page. • There will be no sound when the demonstration mode...
  • Sony STR-K502 | Operating Instructions - Page 15
    ...the receiver. Press SET UP. Hooking Up and Setting Up the Speaker System Press the ...the configuration if you choose MICRO SP. For STR-K502, the speaker size and sub woofer... may also be damaged at high volume position. For STR-DE575, the speaker size and sub woofer selection has been preset to NORM. ...
  • Sony STR-K502 | Operating Instructions - Page 16
    ... surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection ...equalizer see page 34. Hooking Up and Setting Up the Speaker System p Center ...surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection ...
  • Sony STR-K502 | Operating Instructions - Page 17
    ... speakers. • In order to take full advantage of the Dolby Digital bass redirection circuitry, we ... the distance to the closest speaker. Hooking Up and Setting Up the Speaker System B B A 60... that best succeeds in forming a cohesive space between the surround sound from the surround speakers and...
  • Sony STR-K502 | Operating Instructions - Page 18
    ... speaker volume adjustment. Hooking Up and Setting Up the Speaker System 1 2 Press ?/1 to turn on the receiver. Press TEST TONE on the supplied remote. You will hear the test...all speakers at the same time Rotate MASTER VOLUME on the receiver or press MASTER VOL +/- on the remote. 18
  • Sony STR-K502 | Operating Instructions - Page 19
    Before You Use Your Receiver Notes • The front balance, surround balance, center level, and surround level are... and adjust the speaker levels from your listening position using the remote control. Checking the connections After connecting all of your components to the receiver, do the following to...
  • Sony STR-K502 | Operating Instructions - Page 20
    Before You Use Your Receiver There's no sound from a specific component. , Check that the component ...fully inserted into the jacks on both the receiver and the component. Hooking Up and Setting ... into the jacks on both the receiver and the component. If both channels are output from the headphones...
  • Sony STR-K502 | Operating Instructions - Page 21
    ... information about the locations and functions of the buttons and controls on the front panel. It also explains basic ... and Basic Operations 1 ?/1 switch Press to turn the receiver on and off. 2 DISPLAY button Press ... the display, set in the "DIM.RANGE" parameter in the SET UP menu (page 43). 21
  • Sony STR-K502 | Operating Instructions - Page 22
    ... B or C sound field (page 27). 7 Use the SOUND FIELD buttons to enjoy surround sound. For details, see "Enjoying Surround Sound" starting from page 25. A.F.D. button / indicator Press to set the receiver to automatically detect the type of audio signal being input and perform ...
  • Sony STR-K502 | Operating Instructions - Page 23
    ... an analog source without any digital processing Do the following to bypass the sound field and equalizer ...Note If 96 kHz digital signal is input, the EQ, sound field and surround parameters do ...to match the component you selected. 0 MASTER VOLUME control After turning on the component you selected, ...
  • Sony STR-K502 | Operating Instructions - Page 24
    ...qg qh qj qk ql MULTI CHANNEL DECODING VIDEO DVD/LD TV/...EQ LEVEL SURR SET UP NAME A CINEMA STUDIO EX B SOUND FIELD A.F.D. ENTER ...indicator on the button lights up and you can adjust the various surround parameters (effect ... parameters (front balance, surround balance, etc.). qk SET UP button Press...
  • Sony STR-K502 | Operating Instructions - Page 25
    Enjoying Surround Sound This chapter describes how to set up the receiver to enjoy surround sound. You can enjoy multi channel surround when playing back software encoded with Dolby Digital or DTS. You can take advantage of surround sound simply by ...
  • Sony STR-K502 | Operating Instructions - Page 26
    ... fields (etc.). SOUND FIELD buttons: A.F.D. button: Press to set the receiver to automatically detect ...: Turns the equalizer effect on or off. z The receiver memorizes the last sound field selected for each ... can identify Dolby Surround-encoded software by looking at the packaging Dolby Digital discs...
  • Sony STR-K502 | Operating Instructions - Page 27
    ...channel audio signals, is decoded with Dolby Pro Logic to create surround effects. Reproduces the sound characteristics of Sony Pictures Entertainment's... classic films where music is featured in the soundtrack. Reproduces the sound characteristics of Sony Pictures S. C. EX A (SEMI CINEMA STUDIO EX...
  • Sony STR-K502 | Operating Instructions - Page 28
    ... RS SL LS RS SR Enjoying Surround Sound L C R BEHIND** LS RS LS SL... sound imaging to create virtual surround speakers from the sound of the front speakers without using actual surround...size is set to "LARGE". However, sound will be output from the sub woofer if the digital input signal ...
  • Sony STR-K502 | Operating Instructions - Page 29
    ...the A.F.D. button) Automatically detects the type of audio signal being input (Dolby Digital, Dolby Pro Logic, or standard two channel stereo) and performs the proper ...that you can take advantage of your subwoofer to get back correct bass signal. Enjoying Surround Sound 29
  • Sony STR-K502 | Operating Instructions - Page 30
    Understanding the Multi-Channel Surround Displays qs qd 1 2 3 4 5 a DIGITAL PRO LOGIC DTS MPEG STEREO MONO SW SP. OFF ... L C R LFE SL S SR MEMORY 9 qa 8 7 6 0 1 ; DIGITAL This indicator lights up when the receiver is decoding signals recorded in the Dolby Digital format. 2 PRO LOGIC Lights up ...
  • Sony STR-K502 | Operating Instructions - Page 31
    ... DIGITAL [2/0] DOLBY PRO LOGIC PCM XX kHz*** * Signals with Dolby Surround encoded flag OFF ** Signals with Dolby Surround ... HALL or JAZZ CLUB with standard audio formats e.g., PCM, the receiver creates surround signals from the front L and R signals. In this case, sound is output from the surround ...
  • Sony STR-K502 | Operating Instructions - Page 32
    .... Once you customize a sound field, the changes are stored in memory indefinitely (unless the receiver is unplugged for about one week). You can change a customized sound field any ...program source encoded with multi channel surround sound. Press SURR. The button lights up and the ...
  • Sony STR-K502 | Operating Instructions - Page 33
    ... be adjusted separately for MULTI CH IN. 1 2 Start playing a program source encoded with multi channel surround sound. Press LEVEL. The button lights up and the first parameter is displayed. Press the cursor buttons ( or parameter you want to ...
  • Sony STR-K502 | Operating Instructions - Page 34
    ...1 2 Start playing a program source encoded with multi channel surround sound. Press EQ. The button lights up and the first parameter ... of the soundtrack based on the dynamic range information included in the Dolby Digital signal. "COMP. STD" is standard compression, but ...
  • Sony STR-K502 | Operating Instructions - Page 35
    ...BAL. CENTER SURR LEVEL LEVEL SUB WOOFER LFE LEVEL MIX r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r Enjoying Surround Sound r r r r r r r r r r r r r r r r r r r r r r r r r r r r r r D.RANGE COMP. 2CH A.F.D. NORMAL SURROUND CINEMA STUDIO EX. A ...
  • Sony STR-K502 | Operating Instructions - Page 36
    ... and how to preset selected stations. You can tune in stations on this receiver in the following ways: Direct Tuning You can enter a frequency of... its 2-character code (see page 39). Up to 30 FM or AM stations can be preset. The receiver will also scan all the stations that you have preset (see page...
  • Sony STR-K502 | Operating Instructions - Page 37
    ...TUNING +/- TUNER Brief descriptions of buttons used to receive broadcasts PRESET TUNING +/-: Press to scan ... appear at all even when the FM broadcast is received normally, press this button to turn on the "STEREO"... FM: Press to select the FM band. Receiving Broadcasts AUX CD/SACD F TUNER...
  • Sony STR-K502 | Operating Instructions - Page 38
    ..., see "Brief descriptions of buttons used to receive broadcasts" on page 37. 1 2 3 4 Press TUNER. ...; press the - button to scan from high to low. When the receiver reaches either end of the band Scanning ... scanning, press TUNING + or TUNING - again. Receiving Broadcasts If you cannot tune ...
  • Sony STR-K502 | Operating Instructions - Page 39
    ... section, see “Brief descriptions of buttons used to receive broadcasts” on page 37. Before tuning ... radio stations 1 2 Press TUNER. The last received stations is tuned in. Press PRESET TUNING +......C2˜C1N 1 2 3 Press TUNER. The last received station is tuned in. Tune in the station that you ...
  • Sony STR-K502 | Operating Instructions - Page 40
    Other Operations Cursor buttons NAME SET UP MULTI CHANNEL DECODING VIDEO TUNER DVD/LD TV/SAT ?/1 MD/TAPE INPUT MODE MASTER VOLUME ... DISPLAY PRESET TUNING EQ LEVEL SURR SET UP NAME A CINEMA STUDIO EX B SOUND FIELD A.F.D. ENTER MODE 2CH C MULTI CH IN MUTING EQUALIZER - ...
  • Sony STR-K502 | Operating Instructions - Page 41
    ...you select a program source on the receiver, you can record and edit as you normally would using the controls on each component. Before... to select the right character. You can record on a cassette tape or MiniDisc using the receiver. Refer to the instruction manual of your cassette deck or MD deck if...
  • Sony STR-K502 | Operating Instructions - Page 42
    ... can set the receiver to turn off automatically at a specified time. Press SLEEP on the remote while the... press SLEEP on the remote, then specify the time you want using the jog dial on the receiver. ...check the time remaining before the receiver turns off Press SLEEP on the remote. The remaining time ...
  • Sony STR-K502 | Operating Instructions - Page 43
    Adjustment Using the SET UP Button The SET UP button allows you to make the ... is set to DVD/LD by default. 1 2 3 Press SET UP. Press the cursor buttons ( “ MULTI CH IN VISUALମ.is set to “NARROW”. Other Operations 1 2 3 Press SET UP. Press the cursor buttons ( RANGE”. or ) to select “DIM...
  • Sony STR-K502 | Operating Instructions - Page 44
    ... of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Also, see "Checking ... verify that the connections are correct. Should any problem persist, consult your nearest Sony dealer. There's no sound or only a very low-level sound is ...
  • Sony STR-K502 | Operating Instructions - Page 45
    ... does not function. , Point the remote at the remote sensor g on the receiver. , Remove any obstacles in the path between the remote and the receiver. , Replace both batteries in the remote with new ones,...only, use the remote to select a source or component other than TV before operating the receiver...
  • Sony STR-K502 | Operating Instructions - Page 46
    ...from 20 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than ... W/ch Center1): 100 W Surround1): 100 W/ch 1) Depending on the sound field settings and sources, there may be... 96 kHz (DVD/LD OPTICAL IN, COAXIAL IN) Inputs (Digital) DVD/LD (coaxial): Sensitivity: - Impedance: 75 ...
  • Sony STR-K502 | Operating Instructions - Page 47
    ..., 60 Hz Power consumption Models of area code U: STR-DE575/K502: 220W In standby condition: 1W Models of area code CA: STR-DE575: 315 VA In standby condition: 1W Dimensions..., see page 3. Design and specifications are subject to change without notice. Outputs * STR-DE575 only 47
  • Sony STR-K502 | Operating Instructions - Page 48
    ... Cinema Sound This is the generic name of the surround sound produced by digital signal processing technology developed by Sony. Unlike previous surround sound fields mainly directed at the reproduction of music, Digital Cinema Sound is designed specifically ...
  • Sony STR-K502 | Operating Instructions - Page 49
    ... SURR, LEVEL, EQ, and SET UP buttons You can make various ... Turn jog dial to select depends on sound mode (in 16 steps) between -8 to +8 (in 1 increment... FRONT TREBLE FREQUENCY 34 *SET UP L R (FRONT) 15 C (CENTER) SL SR... IN DIM.RANGE * When you press the SET UP button, you can select NORM...
  • Sony STR-K502 | Operating Instructions - Page 50
    ... show the settings of each button. Remote Button SLEEP Operations Receiver Function Activates the sleep ... the receiver turns off automatically. Turns the audio and video components on or off. Remote ... Receiver Receiver Receiver Receiver Receiver Receiver Receiver Receiver Receiver Receiver Remote ...
  • Sony STR-K502 | Operating Instructions - Page 51
    ... LD player/ DAT deck TV TV CD player TV Receiver TV/VCR/SAT CD player Function Pauses play or...sound field mode. Selects MULTI CH IN source. Mutes the sound from the receiver. ** Only for Sony TVs with the picture-in-picture function. Notes • Some functions explained in this section may not work ...
  • Sony STR-K502 | Operating Instructions - Page 52
    ... buttons Tape deck B LD player VCR (remote control mode VTR 1*) g FUNCTION VIDEO 1 ... CD/SACD MENU TUNER F 1 4 2 5 3 6 G ENTER Numeric buttons VCR (remote control mode VTR 2*) VCR (... SOUND FIELD 2CH/OFF A.F.D. - MODE + MUTING * Sony VCRs are operated with a VTR 1, 2 or 3 setting. These ...
  • Sony STR-K502 | Operating Instructions - Page 53
    ... The tables below show the settings of each button. Remote Button SLEEP Operations Receiver Function Activates the sleep function and the duration... mode. D.TUNING Turns the receiver on or off. To watch VCR. (VTR mode 3) To watch VCR. (VTR mode 1) (STR-DE675 only) To watch DVD or laser disc. To watch...
  • Sony STR-K502 | Operating Instructions - Page 54
    Remote Button Description Remote Button D. SKIP/CH/ PRESET +/- Operations Receiver TV/VCR/SAT CD player ... TV TV TV TV TV TV Receiver Receiver Receiver Receiver Receiver * Only for Sony TVs with the picture-in-picture function. Notes • Some functions explained in this section may not work ...
  • Sony STR-K502 | Operating Instructions - Page 55
    Programming the remote You can program the remote to control non-Sony components by changing the code. Once the control signals ...can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote...
  • Sony STR-K502 | Operating Instructions - Page 56
    ... codes in the tables below to control nonSony conponents and also Sony components that the remote is normally unable ... used with your particular component. To control an MD deck Maker SONY DENON JVC KENWOOD Code(s) 301 302 303 304 To control a tape deck Maker SONY DENON KENWOOD NAKAMICHI PANASONIC...
  • Sony STR-K502 | Operating Instructions - Page 57
    To control a VCR Maker SONY AIWA AKAI BLAUPUNKT EMERSON FISHER To control a TV Code(s) 701, ..., 756 754 Additional Information To control a satellite tuner or cable box Maker SONY Code(s) 801, 802, ... 804, 805 815, 816, 817 To control a DVD player Maker SONY PANASONIC PHILIPS PIONEER TOSHIBA DENON...
  • Sony STR-K502 | Operating Instructions - Page 58
    ...connection 12 placement 15 Supplied accessories 4 Surround sound 25-35 B Basic receiver operations 21-24 Batteries 4 I, J, K Indexing. See Naming C ...D Demonstration mode 14 Digital Cinema Sound 48 Direct tuning 38 Dolby Digital 48 Dolby Pro Logic Surround 48 Dubbing. See ...
  • Sony STR-K502 | Operating Instructions - Page 59
    Sony Corporation Printed in Indonesia http://www.world.sony.com/



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Sony STR-K502 - Fm Stereo/fm-am Receiver Manual