Sony XNV-L77BT Operating Instructions - Page 18
Navigation, Using the navigation function, To switch to the current audio/video, source
View all Sony XNV-L77BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Navigation Using the navigation function 1 Connect the navigation module to the car dock. For details, see the supplied installation/ connection manual. 2 Press (TOP), then touch in the top menu. The display to select the view mode appears. The view mode options are as follows. "Navigation Only": Shows the navigation display only. "Dual Screen Navi + A/V (Large)": Shows the current audio/video source on the navigation display. "Dual Screen Navi + A/V (Small)": Shows the key of the current audio/video source on the navigation display. ATT Top Navigation Only Dual Screen Navi + A/V (Large) Dual Screen Navi + A/V (Small) 3 Touch the desired view mode. When selecting "Navigation only" The navigation display appears, and you can then use the navigation function. When selecting "Dual Screen Navi + A/ V (Large)" or "Dual Screen Navi + A/V (Small)" The display to select the position of the audio/ video source and keys appears. 1 Touch the desired position. 2 Touch the display in the navigation area. The audio/video source and keys disappear, and you can then use the navigation function. For further details on navigation operation, refer to the leaflet (supplied by TomTom) for the navigation module. Notes • During navigation operation, operation sound is not output even if "Beep" is set to "ON." • The navigation operation cannot be performed by the remote commander. • The voice guidance is output only from the front speakers, and the volume of the voice guidance is independent of the regular volume. To switch to the current audio/video source Press and hold (TOP). To switch back to the navigation mode, press and hold (TOP). When "Dual Screen Navi + A/V (Large)" or "Dual Screen Navi + A/V (Small)" is selected as a view mode You can also switch to the current audio/video source by the following method. For "Dual Screen Navi + A/V (Large)," touch the audio/video source area. For "Dual Screen Navi + A/V (Small)," touch . To switch back to the navigation mode, touch "Navi" in the reception/playback display. To disconnect the navigation module Press the button on the car dock to release the navigation module, then remove. 12 Note Only connect and disconnect the navigation module while the car's ignition is off and its power indicator is turned off. Upper Left Upper Right Back Select screen position. 18 Lower Left Lower Right