Sony XNV-L77BT Operating Instructions - Page 37
Bluetooth status indications, Installing the microphone, Pairing, Searching from this unit
View all Sony XNV-L77BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
For details on the compatibility of your device, visit the support site. Support site http://esupport.sony.com http://www.sony.com/mobileAV Bluetooth status indications XNV-770BT Bluetooth signal indicator* XNV-660BT Bluetooth signal indicator* * Lights up when the Bluetooth signal is on. Calling... ATT Name 0123456789 Calling... Bluetooth status indications None: Bluetooth signal is off. Lit: Bluetooth signal is on. None: No device is connected for audio streaming. Flashing: Connection is in progress. Lit: A device is connected. None: No cellular phone is connected for handsfree calling. Flashing: Connection is in progress. Lit: A cellular phone is connected. Indicates the signal strength status of the connected cellular phone. Indicates the remaining battery status of the connected cellular phone. Installing the microphone To capture your voice during handsfree calling, you need to install the microphone (supplied). For details on how to connect the microphone, refer to the supplied "Installation/Connections" guide. Pairing Pairing is required only the first time you connect to a Bluetooth device (cellular phone, etc.).*1 To pair this unit to a Bluetooth device, you need to enter the same passkey*2 on this unit and on the Bluetooth device. The passkey can be either your own selected number or the number determined by the Bluetooth device. For details, refer to the manual of the Bluetooth device. *1 If you delete the device registration from this unit, you need to perform pairing again. *2 Passkey may be called "passcode," "PIN code," "PIN number," "password," etc., depending on the Bluetooth device. Tip You can pair up to 9 devices. Searching from this unit Check that the other Bluetooth device is discoverable (set to allow for searching) beforehand. 1 Select the Bluetooth source. To select Bluetooth Phone, press (TOP), then touch "BT Phone" in the top menu. To select Bluetooth Audio, touch "Source List," then "BT Audio." 2 Touch "BT Menu." In the case of Bluetooth Audio, touch "Play Menu," then "BT Menu." continue to next page t 37