TEAC AD-850 AD-850 Owner s Manual - Page 35
Echo mode, Adjust the overall level., Feedback explanation, Echo explanation
View all TEAC AD-850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
ENGLISH 3 Adjust the overall level. Example of display during USB recording Echo mode The ECHO MODE switch can be set to add an echo to the mic input. Play the source back and, while inputting the mic sound, adjust the REC LEVEL knob so that the peak level meter never exceeds 0 continuously. After completing adjustment, continue to the next recording procedure. oo The volume may differ depending on the recording source. In order to record different sources at appropriate volumes, you must adjust the recording level for each source. oo The mic sound will be placed equally in both left and right channels so that it sounds centered. oo When recording with a mic, be careful to lower the volume from speakers and keep the mic away from speakers to prevent feedback. oo The mic sound cannot be recorded when recording from a CD to a USB flash drive. oo Set the MIC LEVEL knob to MIN when not using a mic. OFF No echo 1 Light echo 2 Heavy echo ECHO MODE switch oo Echo is only applied to the mic input. It does not affect other analog sound inputs. oo You can mix and output the mic sound with playback from any input source (CD, USB, TAPE or LINE). Echo explanation This adds reverberations to the original sound. The original sound is repeated with various amounts of delay and damping over time to produce an almost natural reverberation sound like in a hall or studio. Feedback explanation Feedback is when sound output from a speaker is picked up by a mic and returned causing oscillation. This could cause very loud noise that could even damage speakers. 35