TEAC SL-D920 SL-D920 Owner's Manual - Page 27
Setting the Clock, Use the SKIP
View all TEAC SL-D920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ENGLISH Setting the Clock CLOCK ADJ 4 Use the SKIP (.//) buttons to set the current hour. 1 The clock can be set both when the power is on and when the unit is in standby. 2 Press the CLOCK ADJ button for more than 2 seconds. "12 H" or "24 H" blinks on the display. If you want to change the clock display mode, press the . or / button. 5 Press the CLOCK ADJ button again. The "minute" value blinks. < If no button is pressed for 10 seconds, clock setting mode will end. 3 Press the CLOCK ADJ button again. The "hour" value blinks. 6 Use the SKIP (.//) buttons to set the current minute. 7 Press the CLOCK ADJ button again. The clock starts. 27
27
ENGLISH
1
The clock can be set both when the power is on
and when the unit is in standby.
<
If no button is pressed for 10 seconds, clock setting
mode will end.
3
Press the CLOCK ADJ button again.
The “hour” value blinks.
CLOCK ADJ
2
Press the CLOCK ADJ button for more than 2
seconds.
“12 H” or “24 H” blinks on the display. If you want to
change the clock display mode, press the
.
or
/
button.
4
Use the SKIP (
.
/
/
) buttons to set the
current hour.
5
Press the CLOCK ADJ button again.
The “minute” value blinks.
6
Use the SKIP (
.
/
/
) buttons to set the
current minute.
7
Press the CLOCK ADJ button again.
The clock starts.
Setting the Clock