TP-Link AC1900 Archer C9 V2 User Guide - Page 16
The Rear Panel - setup
View all TP-Link AC1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Archer C9 AC1900 Wireless Dual Band Gigabit Router (USB 2) Off Flashing On Off No device is connected to the USB 2.0 port. The router is identifying the device connected to the USB 3.0 port. The device is identified successfully. No device is connected to the USB 3.0 port. Note: After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off. 1.4.2 The Rear Panel Figure 1-1 Rear Panel sketch The following parts are located on the rear panel (View from left to right). USB 2.0: The USB 2.0 port connects to a USB 2.0 storage device or a USB 2.0 printer. Reset/WPS: Pressing this button for less than 5 seconds enables the WPS function. If your client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this button to quickly establish a connection between the router and client devices and automatically configure wireless security for your wireless network. - 5 -