TP-Link AC2600 Archer C2600 V1 User Guide - Page 101
Enter 8.8.8.8 as Primary DNS, click, Advanced, Network, DHCP Server
View all TP-Link AC2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
1. Your computer might not recognize any DNS server addresses, please manually configure DNS server. 1 ) Go to Advanced > Network > DHCP Server; 2 ) Enter 8.8.8.8 as Primary DNS, click Save. Tips: 8.8.8.8 is a safe and public DNS server operated by Google. 2. Power cycle the modem and the TP-LINK router. 1 ) Power off your modem and TP-LINK router, leave them off for 1 minute; 2 ) Power on your modem first, wait about 2 minutes until it get a solid cable or Internet light; 3 ) Power back TP-LINK router; 4 ) Wait another 1 or 2 minutes and check the Internet access. 3. Reset the router to factory default settings and reconfigure. 97
97
1. Your computer might not recognize any DNS server addresses, please manually
configure DNS server.
1 ) Go to
Advanced
>
Network
>
DHCP Server
;
2 )
Enter 8.8.8.8 as Primary DNS, click
Save
.
Tips:
8.8.8.8 is a safe and public DNS server operated by Google.
2. Power cycle the modem and the TP-LINK router.
1 )
Power off your modem and TP-LINK router, leave them off for 1 minute;
2 )
Power on your modem first, wait about 2 minutes until it get a solid cable or
Internet light;
3 )
Power back TP-LINK router;
4 )
Wait another 1 or 2 minutes and check the Internet access.
3. Reset the router to factory default settings and reconfigure.