TP-Link AC2600 Archer C2600 V1 User Guide - Page 73
Specify DHCP Server Settings, By default
View all TP-Link AC2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 11 Customize Your Network Settings 11. 3. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of DHCP Server if necessary, and you can reserve LAN IP address for specified client device. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > Network > DHCP Server. ¾¾ To specify the IP address that the router assigns: 1. Make sure that the Enable DHCP Server checkbox is selected. 2. Enter the starting and ending IP address in the IP Address Pool. 3. Enter other parameters if the ISP offers, the Default Gateway is automatically filled the same as the LAN IP address of the router. 4. Click Save to make the settings effective. 69