TP-Link AC2600 Archer C2600 V1 User Guide - Page 71
Change the LAN Settings, 11. 2. Con to Support IPTV Service, I want to, How can
View all TP-Link AC2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 11 Customize Your Network Settings 11. 1. Change the LAN Settings The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web-based management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > Network > LAN page. 3. Type in a new IP Address appropriate to your needs. 4. Leave the Subnet Mask as the default settings. 5. Click Save. Note: If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one, then you should reconfigure them. 11. 2. Configure to Support IPTV Service I want to: How can I do that? Configure IPTV setup to enable Internet /IPTV /Phone service provided by my Internet Service Provider (ISP). 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > Network > IPTV to open the configuration page. 3. If your ISP provide the networking service based on IGMP technology, e.g., British Telecom(BT) and Talk Talk in UK: 1 ) Select the IGMP Proxy checkbox and select the IGMP Version, either V2 or V3, according to information provided by your ISP. 67