TP-Link AC2600 Archer C2600 V1 User Guide - Page 80
Use WPS for Wireless Connection, 11. 7. 1. Set the Router’s PIN
View all TP-Link AC2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Chapter 11 Customize Your Network Settings 11. 7. Use WPS for Wireless Connection Wi-Fi Protected Setup(WPS) gives consumers an easier approach to set up a securityprotected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > Wireless > WPS . 11. 7. 1. Set the Router's PIN Router's PIN is enabled by default to allow wireless devices to connect to the router using the PIN. You can use the default one or generate a new one. Note: 1. If you want to enable/disable the WPS feature, go to System Tools > System Parameters > WPS, select or clear the Enable WPS check box. 2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is labeled on the bottom of the router. 11. 7. 2. Use the WPS Wizard for Wi-Fi Connections 1. Select a setup method: • Push Button(Recommended): Click the Connect button on the screen. Within two minutes, push the WPS button on the client device. • PIN: Enter the client's PIN, and click Connect. 2. Success will appear on the above screen and the WPS LED on the router will keep on for five minutes if the client has been successfully added to the network. 76