TP-Link AC2600 Archer C2600 V1 User Guide - Page 15
Method 1: Wired, Method 2: Wirelessly
View all TP-Link AC2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 2 Connect the Hardware 3 ) Connect the modem to the Internet port on your router with an Ethernet cable. 4 ) Turn on the modem, and then wait about 2 minutes for it to restart. 5 ) Turn on the router. 6 ) Verify that the following LEDs are on and solid before continuing with the configuration. Power 2.4G 5G Internet On On On On Note: If the 2.4G LED and 5G LED are off, please press the Wi-Fi On/Off button on the side panel for 2 seconds and check the LEDs again in a few seconds later. Tips: For optimum performance, orient the four antennas as shown in the drawing below. 30° 30° 2. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly Connect wirelessly by using the SSID (Network Name) and Wireless Password/PIN printed on the product label at the bottom of the router. 11