TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 CLI Reference Guide Guide - Page 172

Command Mode Profile Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the filtering mode of profile 1 as permit: Switch(config)# ipv6 mld profile 1 Switch(config-igmp-profile)#permit 18.16 range Description The range command is used to configure the range of the profile's filtering multicast address. To delete the corresponding filtering multicast address, please use no range command. A profile contains 16 filtering IP-range entries at most. Syntax range start-ip end-ip no range start-ip end-ip Parameter start-ip -- Start IPv6 multicast address of the filter entry.. end-ip -- End IPv6 multicast address of the filter entry. Command Mode Profile Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure one of the filter multicast address entry as range ff80::1234 to ff80::1235 in profile 1: Switch(config)# ipv6 mld profile 1 Switch(config-igmp-profile)#range ff80::1234 ff80::1235 153