TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 CLI Reference Guide Guide - Page 341

rule-id -- Enter the ID of the ACL rule. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Specify the rule 1 of ACL 200 to be configured with policies: Switch(config)# access-list action 200 rule 1 37.8 redirect Description The redirect command is used to define the policy to redirect the matched packets to the desired port. To disable this policy, please use no redirect command. Syntax redirect interface { fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port } no redirect interface { fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port } Parameter port -- The destination port to which the packets will be redirected. The default is All. Command Mode Action Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Define the policy to redirect the matched packets to port 1/0/1 for rule 1 of ACL 6: Switch(config)# access-list action 6 rule 1 Switch(config-action)# redirect interface gigabitEthernet 1/0/1 322