TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 CLI Reference Guide Guide - Page 93

8.9 serdes-mode (Only for Certain Devices) Note: Only certain devices support this command. Description The serdes-mode command is used to configure the SFP ports to collocate with two kinds of fiber module. Syntax serdes-mode {1000bx | sgmii } Parameter 1000bx-- The SFP port can collocate with normal optical module. sgmii -- The SFP port can collocate with electrical interface module. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure port 1/0/26 to collocate with electrical interface modules: Switch(config)# interface gigabitEthernet 1/0/9 Switch(config-if)# serdes-mode sgmii 8.10 clear counters Description The clear counters command is used to clear the statistics information of all the Ethernet ports and port channels. Syntax clear counters clear counters interface [ gigabitEthernet port ] [ port-channel port-channel-id ] Parameter port -- The Ethernet port number. port-channel-id -- The ID of the port channel. 74