TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 CLI Reference Guide Guide - Page 57

no ip address Parameter dhcp -- Specify the management interface to obtain IP address from the DHCP Server. bootp -- Specify the management interface to obtain IP address from the BOOTP Server. Command Mode Interface Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enter the management VLAN 1 and enable the DHCP Client function on the management interface: Switch(config)# interface vlan 1 Switch(config-if)# ip address-alloc dhcp Disable the IP address obtaining function on the VLAN interface 1: Switch(config)# interface vlan 1 Switch(config-if)# no ip address 4.14 controller cloud-based (Only for Certain Devices) Note: Only certain devices support this command. Description The controller cloud-based command is used to enable Cloud-Based Controller managment. When this feature is enabled, you can further add your devices to your Omada Cloud-Based Controller. To disable the feature, use the no controller cloud-based command. Syntax controller cloud-based no controller cloud-based 38