TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 CLI Reference Guide Guide - Page 72

Example Display the system boot configuration information: Switch# show boot 4.36 show running-config Description The show running-config command is used to display the current operating configurations of the whole system, a specified unit, or a specified port. Syntax show running-config [unit {all | | [ exclude keyword ] [ include keyword ] | interface {fastEthernet | gigabitEthernet | ten-gigabitEthernet} port} ] show running-config [all | | [ exclude keyword ] [ include keyword ] | interface {fastEthernet | gigabitEthernet | ten-gigabitEthernet} port ] Parameter unit -- Specify the unit number of a switch to show the unit's operating configurations. By default, it is 1. all -- Display all the operating configurations of the whole system or a specified unit. | -- Enable filter to filtrate the configurations. You can use exclude and include to set the filter rule. keyword -- The filter conditions, such as interface, vlan, and user. port -- Specify the number of the port to show the port's operating configurations. Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Display the current operating configurations only related to the user: Switch# show running-config | include user 53