TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 CLI Reference Guide Guide - Page 397

Add a Notification entry, and configure the IP Address of the management Host as fe80::1234, the UDP port as 162, the User name of the management station as admin, the Security Model of the management station as v2c, the type of the notifications as inform, the maximum time for the switch to wait as 1000 seconds, and the retries time as 100: Switch(config)# snmp-server host fe80::1234 162 admin smode v2c type inform retries 100 timeout 1000 46.7 snmp-server engineID Description The snmp-server engineID command is used to configure the local and remote engineID of the switch. To restore to the default setting, please use no snmp-server engineID command. Syntax snmp-server engineID { [ local local-engineID ] [ remote remote-engineID ] } no snmp-server engineID Parameter local-engineID -- Local Engine ID for local clients. The Engine ID is a unique alphanumeric string used to identify the SNMP engine on the switch. Its length ranges from 10 to 64 hexadecimal characters, which must be even number meanwhile. remote-engineID -- Remote Engine ID for the switch. The Engine ID is a unique alphanumeric string used to identify the SNMP engine on the remote device which receives informs from the switch. Its length ranges from 10 to 64 hexadecimal characters, which must be even number meanwhile. The snmp-server engineID will be disabled if the local and remote are both not configured. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Specify the local engineID as 1234567890, and the remote engineID as abcdef123456: 378