TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 CLI Reference Guide Guide - Page 342

37.9 s-condition Description The s-condition command is used to limit the rate of the matched packets. To restore the settings to the defaults, please use no s-condition. Syntax s-condition rate rate burst burst-size osd { none | discard } no s-condition Parameter rate -- Specify a rate, ranging from 0 to 1000000kbps. burst-size -- Specify the number of bytes allowed in one second ranging from 1 to 128. osd --Select either "none" or "discard" as the action to be taken for the packets whose rate is beyond the specified rate. The default is None. Command Mode Action Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure a policy for rule 1 of ACL 6: limit the transmission rate of the matched packets as 1000 Kbps and if the number of bytes per second is beyond 100, the packets will be discarded by the switch: Switch(config)#access-list action 6 rule 1 Switch(config-action)# s-condition rate 1000 burst 100 osd discard 37.10 s-mirror Description The s-mirror command is used to define the policy to mirror the matched packets to the desired port. To disable this policy, please use no s-mirror command. Syntax s-mirror interface { fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port } 323