TP-Link TD-W8951NB TD-W8951NB V4 User Guide - Page 65

TD-W8951NB, Step 1, Step 2, IP/MAC Filter Set Index, IP/MAC Filter Rule Index, Step 3, Step 4, Step

Get TP-Link TD-W8951NB PDF manuals and user guides View all TP-Link TD-W8951NB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide as follows. Presume the rules are both aimed at the interface PVC0, and their indexes are (1, 1), (1, 2) and (1, 3). Step 1: Select the "IP/MAC Filter" as the Filter Type Selection (show in Figure 4-39). Select the "IP" as the Rule Type on the Filter screen, then you can configure the specific rule for the example. Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then select the Interface "PVC0", and select the Direction "Both" for the first rule. ) Note: If you want to make the rule take effect, please select Yes to active the rule. Step 3: Enter the "Source IP Address", "Destination IP Address", "Subnet Mask" and "Port Number" in the corresponding field. Step 4: Select the Protocol as "TCP" and select the Unmatched rule as "Next". Step 5: Finally, click the SAVE to save the entry. 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
TD-W8951NB
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
58
as follows. Presume the rules are both aimed at the interface PVC0, and their indexes are (1, 1),
(1, 2) and (1, 3).
Step 1:
Select the “IP/MAC Filter” as the Filter Type Selection (show in Figure 4-39).
Select the “IP” as the Rule Type on the Filter screen, then you can configure the specific
rule for the example.
Step 2:
Select the
IP/MAC Filter Set Index
and
IP/MAC Filter Rule Index
for the rule, then
select the Interface “PVC0”, and select the Direction “Both” for the first rule.
)
Note:
If you want to make the rule take effect, please select
Yes
to active the rule.
Step 3:
Enter the “Source IP Address”, “Destination IP Address”, “Subnet Mask” and “Port
Number” in the corresponding field.
Step 4:
Select the Protocol as “TCP” and select the Unmatched rule as “Next”.
Step 5:
Finally, click the
SAVE
to save the entry.