TP-Link TL-WR743ND User Guide - Page 12
The Rear Panel, TL-WR743ND, POWER, ON/OFF - wireless ap client router
UPC - 845973051556
View all TP-Link TL-WR743ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1.4.2 The Rear Panel TL-WR743ND 150Mbps Wireless AP/Client Router Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ¾ POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR743ND 150Mbps Wireless AP/Client Router. ¾ ON/OFF: The switch for the power. ¾ WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet. ¾ 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s). ¾ RESET: There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on "System Tools → Factory Defaults" page in the Router's Web-based Utility. 2) Use the Factory Default RESET button: With the Router powered on, use a pin to press and hold the RESET button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings. ¾ Wireless antenna: To receive and transmit the wireless data. - 5 -