TP-Link TL-WR743ND User Guide - Page 36

Network, 4.6.1 LAN - ip address

Get TP-Link TL-WR743ND PDF manuals and user guides
UPC - 845973051556
View all TP-Link TL-WR743ND manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

TL-WR743ND 150Mbps Wireless AP/Client Router port acts the same as a LAN port while at AP Router mode. 4.6 Network Figure 4-6 the Network menu There are three submenus under the Network menu (shown in Figure 4-6): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. 4.6.1 LAN Choose menu "Network → LAN", you can configure the IP parameters of the LAN on the screen as below. Figure 4-7 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your Router in dotted-decimal notation (factory default: 192.168.1.1). ¾ Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. ) Note: 1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router. 2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configured automatically，while the Virtual Server and DMZ Host will not take effect until they are re-configured. 4.6.2 WAN Choose menu "Network → WAN", you can configure the IP parameters of the WAN on the - 29 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
TL-WR743ND
150Mbps Wireless AP/Client Router
- 29 -
port acts the same as a LAN port while at AP Router mode.
4.6 Network
Figure 4-6
the Network menu
There are three submenus under the Network menu (shown in Figure 4-6):
LAN
,
WAN
and
MAC
Clone.
Click any of them, and you will be able to configure the corresponding function.
4.6.1 LAN
Choose menu “
Network
→
LAN
”, you can configure the IP parameters of the LAN on the screen
as below.
Figure 4-7
LAN
¾
MAC Address
-
The physical address of the LAN ports, as seen from the LAN. The value
can't be changed.
¾
IP Address -
Enter the IP address of your Router in dotted-decimal notation (factory default:
192.168.1.1).
¾
Subnet Mask -
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
)
Note:
1.
If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2.
If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically
，
while the Virtual Server and
DMZ Host will not take effect until they are re-configured.
4.6.2 WAN
Choose menu “
Network
→
WAN
”, you can configure the IP parameters of the WAN on the