TP-Link TL-WR743ND User Guide - Page 70
Basic Security, TL-WR743ND, Security, Basic Security, Firewall, SPI Firewall, PPTP Passthrough
UPC - 845973051556
View all TP-Link TL-WR743ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
TL-WR743ND 150Mbps Wireless AP/Client Router 4.10.1 Basic Security Choose menu "Security → Basic Security", you can configure the basic security in the screen as shown in Figure 4-42. Figure 4-42 Basic Security ¾ Firewall - A firewall protects your network from the outside world. Here you can enable or disable the Router's firewall. z SPI Firewall - SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking more state per session. It validates that the traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the computers on the LAN exposed to the outside world, you can disable it. ¾ VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP, or L2TP protocols to pass through the Router's firewall. z PPTP Passthrough - Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be tunneled through an IP network. To allow PPTP tunnels to pass through the Router, keep the default, Enabled. z L2TP Passthrough - Layer 2 Tunneling Protocol (L2TP) is the method used to enable Point-to-Point sessions via the Internet on the Layer 2 level. To allow L2TP tunnels to - 63 -